Rugged Cams Rugged Vision DVR - Manual (Page 72)

System
Set Alarm Sound
1. To enable Alarm Sound, select
“System”. This will enable the system beep.
2. Or select “None” if otherwise.
3. Click the OK button to save your settings.
Set Recording Path
1. Under the File System box, click on
Browse to open the search dialog box.
2. Search for the folder where you want your video recordings to be stored/saved.
3. Once you are done, click on OK to set the path.
4. Click the OK button to save your settings.
Set Cycle Dwell Time
1. To set how long the camera waits before moving on to the next camera in cycle mode, place
the desired number in seconds in the text box under the label Cycle Dwell Time.
2. Click the OK button to save your settings.
72