Using a custom box, Creating a new custom box, Using a custom box -32 – TA Triumph-Adler P-C3060 MFP User Manual
Page 183: Creating a new custom box -32, Custom box
5-32
Operation on the Machine > Using a Custom Box
Using a Custom Box
Custom Box is a component box which you can create within the Document Box and store data for later retrieval. You
can create or delete a Custom Box, and manipulate data in various ways as described below:
Creating a New Custom Box
1
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [Document Box] > [OK] key > [▲] [▼] key >
[Custom Box] > [OK] key > [▲] [▼] key > [Detail/Edit] > [OK] key > [Menu]
2
Create a custom box.
1
[▲] [▼] key > [Add Box] > [OK] key
2
Enter the box name and select the [OK] key.
Creating a New Custom Box (page 5-32)
Printing Documents (page 5-35)
Deleting Documents (page 5-37)
NOTE
The operation on Custom Box you perform from operation panel can also be made using Embedded Web Server RX.
Embedded Web Server RX User Guide
NOTE
• To use Custom Box, an optional SSD must be installed in the machine.
• If user login administration is enabled, you can only change the settings by logging in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
3000
Login Password:
3000
• If user login administration is enabled, log in with administrator privileges to perform the following operations. They
cannot be performed with user privileges.
- Creating a box
- Deleting a box of which owner is another user.
NOTE
Up to 32 characters can be entered.
For details on entering characters, refer to the following: