TA Triumph-Adler P-C3060 MFP User Manual
Page 334
10-15
Troubleshooting > Troubleshooting
Skewed-color printout.
―
Run [ColorCalibration].
―
Run [Color Regist.].
Colors appear different than
you anticipated.
Did you choose appropriate image
quality for the original?
Select appropriate image quality.
Have you loaded color copy paper into
the paper tray?
Load color copy paper into the paper
tray.
―
―
When making copies
Adjust the color balance.
―
When printing from a computer
Adjust the color using the printer driver.
―
The previous image remains
and lightly printed.
―
Select the [System Menu/Counter] key
> [Adjust/Maint.] > [Service Setting] >
[MC] and increase the adjustment value.
Increase the adjustment value 1 level at
a time from the current value. If there is
no improvement after the value is
increased by 1 level, increase by 1 level
again. If there is still no improvement,
return the setting to the original value.
―
Cannot send via SMB.
Is the network cable connected?
Connect the correct network cable
securely.
Have the network settings for the
equipment been configured properly?
Configure the TCP/IP settings properly.
Have the folder sharing settings been
configured properly?
Check sharing settings and access
privileges under the folder properties.
Has the SMB protocol been set to [On]?
Set the SMB protocol setting to [On].
Has [Host Name] been entered
properly?
*1
Check the name of the computer to
which data is being sent.
Has [Path] been entered properly?
Check the share name for the shared
folder.
Has [Login User Name] been entered
properly?
*2
Check the domain name and login user
name.
Has the same domain name been used for
[Host Name] and [Login User Name]?
Delete the domain name and backslash
("/") from [Login User Name].
Has [Login Password] been entered
properly?
Check the login password.
Have exceptions for Windows Firewall
been configured properly?
Configure exceptions for Windows
Firewall properly.
Do the time settings for the equipment,
domain server, and data destination
computer differ?
Set the equipment, domain server, and
data destination computer to the same
time.
―
Is the screen displaying Send error?
Symptom
Checkpoints
Corrective Actions
Reference
Page