TA Triumph-Adler P-C3060 MFP User Manual
Page 342
10-23
Troubleshooting > Troubleshooting
R
Message
Checkpoints
Corrective Actions
Reference
Page
RAM disk error. Press
[OK].
―
An error has occurred on the RAM
disk. Job is canceled. Select [OK].
The possible error codes and their
descriptions are as follows.
04: Insufficient space on the RAM
disk. If the optional RAM dis is
installed, increase the RAM Disk
Size by changing RAM Disk Mode
in System Menu.
NOTE
The range of RAM disk size can be
increased by selecting [Printer
Priority] in Optional Memory.
Removable Memory is
full. Job is canceled.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
―
Job is canceled. Select [OK].
Insufficient free space in the
removable memory. Delete
unneeded files.
―
Remove original from
document processor.
Are there any originals left in the
document processor?
Remove originals from the
document processor.
―
Replace all originals and
press Start key.
―
Remove originals from the
document processor, put them back
in their original order, and place
them again. Press the [Start] key to
resume printing. Select [Cancel] to
cancel the job.
―
Replace MK.
—
Replacement of the parts in the
maintenance kit is necessary at
every 200,000 pages (P-C3060
MFP/P-C3065 MFP) of printing and
requires professional servicing.
Contact your Service
Representative.
—
Replace the toner.
―
Replace the toner container to our
specified toner container.
Restricted by Job
Accounting.
Cannot print.
—
This job is canceled because it is
restricted by Job Accounting. Select
[OK].
—