Amprobe MEGATEST-1000 Megohmmeter - Manual (Page 14)

CAL LOW
Ω
o> 9.99 Ω
- - - mA 4 s
R+
TIMER
In case the mode R+TIMER or R-
TIMER was selected and a R+ or R-
higher than 9.99
Ω was detected, the
instrument emits an intermittent
sound signal during the test, a
long sound signal at the end of the
test and displays the screen
alongside.
The tests can be stored pressing the SAVE key twice (see
paragraph 0).
9.99 Ω is the
maximum
value which
can be
measured in
LOW
Ω,
R+TIMER
or R-TIME
mode.
R
ATTENTION: value of R+ or R- is too high.
SAVE
CAL LOW
Ω
o 0.00 Ω
219 mA
AUTO
In case that:
R
MEASURED
-R
CALIBRATION
< 0 Ω the
instrument displays the screen
alongside.
blinking CAL.
ATTENTION: R
MEASURED
-R
CALIBRATION
< 0 .
Selected mode: (in this case
AUTO).
SAVE
The tests can be stored pressing the SAVE key twice (according to
paragraph 0).
13