Amprobe MEGATEST-1000 Megohmmeter - Manual (Page 3)

1. OVERVIEW
Thank you for purchasing the MEGATEST 1000, Model AMB-6D, from Amprobe. We
have been in the marketplace for over 50 years and are a leader in the field of electrical
measurement.
We intend to satisfy our customers’ requirements by continuing to provide increasingly
reliable and innovative products.
This instrument was designed to provide the user with the utmost safety features thanks to
a new concept assuring double insulation and over voltage category III classification.
1.1 INITIAL INSPECTION
This instrument has been checked mechanically and electrically prior to shipment and
every care has been taken to ensure that the instrument reaches you in the proper
working order.
It is recommended, however, that you carry out a quick check of the instrument to detect
any possible damage that may have occurred during transport. If any damage is observed
please contact your dealer immediately.
Check also that the packaging contains all the parts listed under paragraph 10.1. If there
are any discrepancies please contact the dealer.
In case you have to send the instrument back please follow the instructions reported in
paragraph 11.
1.2 POWER SUPPLY
The AMB-6D is powered by six each, 1.5 Volt, “AA” alkaline batteries (not included).
For battery life information see paragraph 10.
When batteries are low the “battery symbol”
is displayed.
To replace batteries follow the instructions in paragraph 9.2.
1.3 CALIBRATION
This instrument fulfils the technical specifications listed in this manual. The performance to
these specifications is guaranteed for one year. Annual re-calibration is recommended.
1.4 STORAGE
In order to ensure the accuracy of the measurements, after a period of storage in extreme
environmental conditions, wait for the time necessary so that the instrument is back to
normal measuring conditions (see environmental specifications listed in Section 10).
2