PLANET FGSW-2620VM - Manual (Page 166)

User’s Manual of FGSW-Series
6.9 Port Mirroring Configuration
Port monitoring is a feature to redirect the traffic occurred on every port to a designated monitoring port on the switch. With
this feature, the network administrator can monitor and analyze the traffic on the entire LAN segment. In the Managed
Switch, you can specify one port to be the monitored ports and any single port to be the monitoring port. You also can
specify the direction of the traffic that you want to monitor. After properly configured, packets with the specified direction
from the monitored ports are forwarded to the monitoring port.
The default Port Monitoring setting is disabled.
mirror-port
Description:
Set port monitoring information. (RX only|TX only|both RX and TX)
Syntax:
mirror-port <rx | tx | both> <port-id> <port-list>
Parameters:
rx specifies monitoring rx only.
tx specifies monitoring tx only.
both specifies monitoring both rx and tx.
<port-id> specifies the analysis port ID. This port receives traffic from all monitored ports.
<port-list> specifies the monitored port list.
show mirror-port
Description:
Show port monitoring information
166