PLANET FGSW-2620VM - Manual (Page 189)

User’s Manual of FGSW-Series
6.18.3 Configure PoE -- System
poe limit-mode
Description:
Configure System PoE power limit mode information
Command Level
Global Configuration
Syntax:
poe limit-mode { Port-Priority / Total-Limit }
[no] poe limit-mode
Parameters:
<Port Priority> Deliver PoE power by port priority setting
<Total Limit> Set limit value of the total POE port provided power to the PDs.
“no poe limit-mode” = No Limit
Example:
Switch(config)# poe limit-mode classification
Switch (config)# show poe
Maximum Available Power
System Operation Status
PoE Power Consumption
Usage Threshold
PoE Power limit mode
:190Watts
: on
: 55 watts
: 21%
: classification
Switch (config)# no poe limit-mode
Switch (config)# show poe
189