PLANET FGSW-2620VM - Manual (Page 170)

User’s Manual of FGSW-Series
170
smac-address-table static
Description:
Set static unicast or multicast MAC address in secondary MAC address table. If multicast MAC address (address
beginning with 01:00:5E) is supplied, the last parameter must be port-list. Otherwise, it must be port-id.
Syntax:
smac-address-table static <mac-addr> <vlan-id> <port-id | port-list>
show smac-address-table
Description:
Display secondary MAC address table entries.
show smac-address-table multicast
Description:
Display multicast related secondary MAC address table.
[no] filter
Description:
Set MAC address filter. The packets will be filtered if both of the destination MAC address and the VLAN tag match the
filter entry. If the packet does not have a VLAN tag, then it matches an entry with VLAN ID 1.
Syntax:
[no] filter <mac-addr> <vlan-id>
show filter
Description:
Display filter MAC address table.