PLANET GS-5220-48T4X - Manual (Page 209)

Command Guide
4.2.86 ip name-server dhcp interface vlan
Command:
ip name-server dhcp interface vlan <vlan_id>
ip Internet Protocol
name-server Domain Name System
dhcp Dynamic Host Configuration Protocol
vlan VLAN Interface
<vlan_id> VLAN identifier(s): VID
Default:
None
Usage Guide:
To configure DNS IP address via specific VLAN DHCP Server.
Example:
To configure DNS IP address via specific VLAN 5 DHCP Server.
Switch# configure terminal
Switch (config)# ip name-server dhcp interface vlan 5
4.2.87 ip route
Command:
ip route <ipv4_addr> <ipv4_netmask> <ipv4_gateway>
ip Internet Protocol
route Add IP route
<ipv4_addr> Network
<ipv4_netmask> Netmask
<ipv4_gateway> Gateway
Default:
None
Usage Guide:
To configure static route
Example:
To configure static route as below table.
-209-