PLANET GS-5220-48T4X - Manual (Page 229)

Command Guide
4.2.103.14 width
Command:
width <0 or 40-512>
width Set width of the display terminal
<0 or 40-512> Number of characters on a screen line (0 for unlimited width)
Default:
0
Usage Guide:
To configure width of the display terminal.
Example:
To configure width (50) of the display terminal for vty 1.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# width 50
4.2.104 lldp holdtime
Command:
lldp holdtime <2-10>
lldp LLDP configurations.
holdtime Sets LLDP hold time (The neighbor switch will discarded the LLDP information after "hold time" multiplied
with "timer" seconds ).
<2-10> 2-10 seconds
Default:
4
Usage Guide:
To enable LLDP hold time
Example:
To enable LLDP hold time (5)
Switch# configure terminal
Switch (config)# lldp holdtime 5
-229-