PLANET WGSW-48040HP - Manual (Page 184)

User’s Manual of WGSW-48040HP
4.9.5.1 QoS Egress Port Schedule and Shapers
The Port Scheduler and Shapers for a specific port are configured on this Page. The QoS Egress Port Schedule and Shaper
sscreen in Figure 4-9-5 appears.
Figure 4-9-5: QoS Egress Port Schedule and Shapers Page Screenshot
The Page includes the following fields:
Object Description
Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this
switch port.
 Schedule Mode
 Queue Shaper Enable Controls whether the queue shaper is enabled for this queue on this switch port.
Controls the rate for the queue shaper. The default value is 500. This value is
restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to
1-13200 when the "Unit" is "Mbps".
 Queue Shaper Rate
Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The
default value is "kbps".
 Queue Shaper Unit
 Queue Shaper Excess Controls whether the queue is allowed to use excess bandwidth.
 Queue Scheduler
Weight Controls the weight for this queue. The default value is "17". This value is
restricted to 1-100. This parameter is only shown if "Scheduler Mode" is set to
"Weighted".
184