PLANET WGSW-48040HP - Manual (Page 221)

User’s Manual of WGSW-48040HP
value is "Disabled".
Specify the logging operation of this port. The allowed values are:
■
Enabled: Frames received on the port are stored in the System Log.
■ Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate are limited.
 Logging
Specify the port shut down operation of this port. The allowed values are:
■
Enabled: If a frame is received on the port, the port will be disabled.
■ Disabled: Port shut down is disabled.
The default value is "Disabled".
 Shutdown
Specify the port state of this port. The allowed values are:
■ Enabled: To reopen ports by changing the volatile port configuration of the
ACL user module.
■ Disabled: To close ports by changing the volatile port configuration of the
ACL user module.
The default value is "Enabled".
 State
Counts the number of frames that match this ACE.  Counter
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the Page; any changes made locally will be undone.
: Click to clear the counters.
221