PLANET HPOE-1200G - Manual (Page 17)

User’s Manual of HPOE-1200G / HPOE2400G
17
2.2.4 Power over Ethernet Powered Device
3~5 Watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-Ethernet
end-devices to the central where UPS is installed for un-interrupt power system and
power control system.
6~12 Watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can install the
Access Point any where with no hesitation
10~12 Watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera without limits of
install location – no need electrician to install AC sockets.
3~12 Watts
PoE Splitter
PoE Splitter split the PoE 52V DC over the Ethernet cable into 5/9/12V DC power
output. It frees the device deployment from restrictions due to power outlet locations,
which eliminate the costs for additional AC wiring and reduces the installation time.
3~25 Watts
High Power PoE Splitter
High PoE Splitter split the PoE 52V DC over the Ethernet cable into 5/9/12V DC
power output. It frees the device deployment from restrictions due to power outlet
locations, which eliminate the costs for additional AC wiring and reduces the
installation time.