PLANET HPOE-1200G - Manual (Page 24)

User’s Manual of HPOE-1200G / HPOE2400G
24
• Configuration Setting Allow to backup or restore system configuration. Explained in section 4.3.6 .
• Factory Default Allow to reset system to factory default setting. Explained in section 4.3.7 .
• System Log
Allow to enable system log and to record system log. Explained in section
4.3.8 .
• System Reboot Allow to reboot system. Explained in section 4.3.9 .
4.3.1 System Information
This section display system information of PoE Injector Hub, the screen in Figure 4-3-1 appears and Table 4-3-1 describes
the system information object of PoE Injector Hub.
Figure 4-3-1: System Information Web page screen
Object Description
• System Name Display the PoE Injector Hub model name.
• MAC Address Display the MAC Address of PoE Injector Hub.
• Software Version
Display the current firmware version of PoE Injector Hub.
• Hardware Version
Display the hardware version of PoE Injector Hub.
• Attain IP Protocol
Displays the current attain IP protocol of PoE Injector Hub.
• IP Address
Displays the current IP address of PoE Injector Hub.
• Subnet Mask
Displays the current subnet mask address of PoE Injector Hub.
• Gateway
Displays the current gateway address of PoE Injector Hub.
• Description
Display the system description of PoE Injector Hub.
• System Date
Display the current system date of PoE Injector Hub. The system date will correct
if NTP function was enabled and The Hub connected to Internet.
• System UpTime
Display that when the system started up.
Table 4-3-1: Descriptions of the System Information Web page screen Objects