PLANET HPOE-1200G - Manual (Page 5)

User’s Manual of HPOE-1200G / HPOE2400G
5
1. INTRODUCTION
1.1 Package Contents
CHECK THE CONTENTS OF YOUR PACKAGE FOR FOLLOWING PARTS:
●
The PoE Injector Hub x 1
●
The Quick Installation Guide x 1
●
User’s Manual CD x 1
●
Power Cord x 1
●
Rubber Feet x 4
●
Two Rack-mounting brackets with attachment screw x1 (set)
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the
original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
In the following section, the term “PoE Injector Hub” means the two Gigabit PoE Injector Hub devices, i.e. HPOE-1200G,
HPOE-2400G. Terms with lower case “injector” means any IEEE 802.3at / 802.3af power injectors. “PD” means the
abbreviated from IEEE 802.3at / 802.3af powered device.
1.2 Product Description
The PoE Injector Hub are 12 / 24-Port IEEE 802.3at / 802.3af Power over Ethernet Mid-Span injector hub complies with
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3at and IEEE 802.3af standards. It is equipped with 12 / 24
10/100/1000Mbps Gigabit Ethernet ports that support full 52V DC power for any remote IEEE 802.3at / 802.3af powered
device (PD) like 802.11b/g/n Wireless LAN Access Point, IP phone, LAN Camera or any other network devices. The PoE
Injector Hub should provide the sufficient 30.8 / 15.4 Watts power each port to the 12 / 24 remote PD devices with 460 / 340
Watts power supply.
The PoE Injector Hub is installed between a regular Ethernet switch and the powered devices, injecting power without
affecting the data transmit. It offer a cost effective solution and quickly way to upgrade network system to IEEE 802.3at /
802.3af Power over Ethernet, without replace the existing Ethernet Switch.
There are 24 / 48 RJ-45 STP ports on the front panel of PoE Injector Hub, 12 / 24 of them on lower stack are "Data" ports
and the other 12 / 24 ports on upper stack are "Data + Power output" ports. Each of the "Data + Power output" port on
upper stack functions as an injector which inserts DC Voltage into the CAT 5e/6 cable allowing the cable between the
Injector and Splitter to transfer data and power simultaneously.
To manage your powered devices, the PoE Injector Hub provides both Web management interfaces in which
administrators can manage functions such as port Enable/Disable, port priority, limit, schedule, system configuration,
Username/Password changing and with smart feature for powered device, the PoE Injector Hub can auto detect the power
status on each port and show massages Web management interface. These features also provided a cost-effective way to
manage the devices from Internet whenever you are at work or at home.