PLANET ICA-2200 - Manual (Page 18)

User’s Manual of ICA-2200
12
Chapter 3. Initial Utility Installation
This chapter shows how to quick set up your Inte rnet camera. The Internet camera is with the
default settings for the first time power on.
Default IP: DHCP Client OR 192.168.0.20 (if NO DHCP server existed in the network)
Username: admin
Password: admin
However, if you are not fa miliar with network setting and to help you find the networke d Internet
camera quickly, the windows utility PLANET IP Wizard II can search the cameras in the network
that shall help you to configure some basic setting before you started advanced management and
monitoring.
1. Insert the bundle d CD into the CD-ROM driv e to launch the auto-run p rogram. Once
completed, a welcome menu screen will appear.
2. Click the “IP Wizard II” hyperlink; you will see the dialog box as below.
NOTE:
If the welcome screen does not appear, click “Start” at the taskbar. Then, select “Run”
and type “D:\Utility\IPWizard II\setup.exe”, assume D is your CD-ROM drive.
3. The “Welcome to the InstallShield Wizard for PLANET IP Wizard II” prompt will display on the
screen and click “Next” to continue.