PLANET ICA-2200 - Manual (Page 63)

User’s Manual of ICA-2200
57
6.7. E-Mail Configuration
You may setup SMTP mail param eters for further operation of Event Schedul e. That’s, if users
want to send the alarm m essage out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
SMTP Server
Type the SMTP server name or the IP address of the SMTP server.
Test
Send a test mail to mail server to check this account is available or
not.
SMTP Port
Set port number of SMTP service.
SSL
Enable SSL function or not.
SMTP Authentication
Select the authentication required when you send an e-mail.
Disable:
If no authentication is required when an e-mail is send.
Enable:
If authentication is required when an e-mail is sent.
Authentication User
Name
Type the user name for the SMTP server if Authentication is Enable.
Authentication Password
Type the password for the SMTP server if Authentication is Enable.
E-mail From
Type the sen der’s E-mail address. This address is use d for repl y
e-mails.
E-mail To
Type the receiver’s e-mail address.
E-mail Subject
Type the subject/title of the e-mail.