Pppoe – PLANET ICA-2200 User Manual

Page 39

Advertising
background image

User’s Manual of ICA-2200

33

more information.

DDNS

To enable or disable the DDNS service here.

Server name

Choose the built-in DDNS server.

DDNS Host

The domain name is applied of this device.

User Name

The user name is used to log into DDNS.

Password

The password is used to log into DDNS.

6.1.5. PPPoE

PPPoE: Stands for Point to Point Protocol over Ethernet
A standard builds on Eth ernet and Point-to-Point network protocol. It allows Internet Ca mera

connect to Internet with xDSL or cable conne ction; it can dial up your ISP and get a dynamic IP

address. For more PPPoE and Internet configuration, please consult your ISP.
It can directly connect to the xDSL, however, it should be setup on a LAN environment to program

the PPPoE information first, and then connect to the xDSL modem. Power on again, then the

device will dial on to the ISP connect to the WAN through the xDSL modem.
The procedures are

• Connect to a LAN by DHCP or Fixed IP
• Access the device, enter Setting Î Network Î PPPoE as below

Advertising
This manual is related to the following products: