2 installing camera w/stand with screws – PLANET ICA-5250 User Manual
Page 14
Full HD Ultra-mini Vandal Dome
ICA-5250
2.2.2 Installing camera w/stand with screws
1. Open the stand kit, which includes a conversion ring and two sets of screws.
2. Use three screws to lock the conversion ring on the ceiling or the wall.
3. Use three screws to combine the base of camera with the conversion ring. The cable
can pass through the hole on the side of conversion ring.
4. Put back the cover by turning it tightly so as to prevent water from getting into it.
The package has a mounting guide label for hardware installation.
2.2.3 Network Installation
1. Connecting an Ethernet cable
Connect the LAN cable on the camera to the network device (hub or switch).
If there is an IEEE802.3af PoE switch in your network, you can connect the camera LAN
cable to this PoE switch to obtain power. The power adapter is unnecessary when
Internet camera is connected to a PoE switch.
14