PLANET ICA-5250 - Manual (Page 42)

Full HD Ultra-mini Vandal Dome
ICA-5250
SNMPv3:
For data security reason, the authentication and encryption assurances are added when
developing SNMPv3. The user has to give not only the security name (the same as "community
name" in v1&v2c, or sometimes we call it "context name") but the password in order to access
the IP camera. Please set security name, authentication type, authentication password,
encryption type, encryption password of write and read respectively. The password must be
8~64 bits in length.
Different from SNMPv1 and v2c, the user have to create an account when using SNMPv3. In
the account parameters, key in the security name and password you set in the camera to get
accessing.
SNMPv1/SNMPv2 Trap:
Trap is a mechanism that allows the managed device to send messages to manager instead of
waiting passively for polling from the manager. Specify the trap event. When those events
happen, the camera will send the ring message to the Trap Address, which is usually the
manager's IP address. Trap Community means the community that can receive the trap message.
• Cold Start: The camera starts up or reboots.
• Setting changed: The SNMP setting is changed.
• Network Disconnected: The network connection was broken down. (The camera will send trap
messages after the network being connected again)
• V3 Authentication Failed: A SNMPv3 user account tries to get authentication but failed. (Due to
incorrect password or community)
• SD Insert / Remove: A Micro SD card is inserted or removed.
42