PLANET ICA-5250 - Manual (Page 17)

Full HD Ultra-mini Vandal Dome
ICA-5250
(1) IP Installer will search all IP cameras connected to LAN. The user can click “Search Device”
to search again.
(2) Click one of IP cameras listed on the left side of IP Installer, then the network configuration of
that IP Camera will be listed on the right side. If parameters changed, click on “Submit”.
Then, the network configuration will be changed. Just click “OK” to reboot
(3) Please make sure the subnet of PC IP address and IP CAM IP address are the same.
IP CAM IP address: 192.168.0.20
PC IP address: 192.168.0.100
(4) Different Subnets:
IP CAM IP address: 192.168.0.20
PC IP address: 192.168.1.100
(5) To Change PC IP addresses:
Control PanelÆNetwork ConnectionsÆLocal Area Connection PropertiesÆInternet Protocol
(TCP/IP) ÆProperties
Please make sure your IP Camera and PC have the same Subnet. If not, please change IP
Camera IP subnet or PC IP subnet accordingly.
(6) A quick way to access remote monitoring is to left-click the mouse twice on a selected IP
camera listed on “Device list” of PLANET IP Installer. An IE browser will be opened.
17