PLANET ICA-5250 - Manual (Page 39)

Full HD Ultra-mini Vandal Dome
ICA-5250
39
UPnP
This IP camera supports UPnP. If this service is enabled on your
computer, the camera will automatically be detected and a new
icon will be added to “My Network Places.”
Note: UPnP must be enabled on your computer.
UPnP Port Forwarding
When the camera is installed under a router, enable UPnP Port
Forwarding to let the router open ports so that the video
streams can be sent out from a LAN. Set Web Port, Http Port,
and RTSP port, and make sure your router supports UPnPTM
and the function has been activated.
RTSP Server enable or disable RTSP server
RTSP Authentication
"Disable" means everyone who knows your camera IP
Address can link to your camera via RTSP. No username and
password are required.
Under "Basic" and "Digest" authentication mode, the camera
asks the user to give username and password before allows
accessing. The password is transmitted as clear text under
basic mode, which provides a lower level of security than under
digest mode.
Make sure your media player supports the authentication
schemes
RTSP port
RTSP Port: setup port for RTSP transmitting (Default: 554)
RTSP Start and End Port: in RTSP mode, you may use TCP and
UDP for connecting. TCP connection uses RTSP Port (554).
UDP connection uses RTSP Start and End Port.
Multicast Setting (Based
on the RTSP Server)
Multicast is a bandwidth conservation technology. This
function allows several users to share the same packet
sent from IP camera. To use Multicast, appoint IP Address
and port here. TTL means the life time of packet, The
larger the value is, and the more users can receive the
packet.
To use Multicast, be sure to enable the function "Force Multicast
RTP via RTSP" in your media player. Then key in the RTSP
path of your camera: "rtsp://(IP address)/" to receive the
multicast.
ONVIF
The IP camera supports ONVIF v1.01 / v1.02 / v2.10 standard
for to integration.
Under ONVIF connection, the video will be transmitted by RTSP.
Be sure to enable the RTSP server in IP setting, or you're not
able to receive the video via ONVIF.
RTSP Keepalive
When the function is enabled, the camera checks once in a
while if the user who links to the camera via ONVIF still keeps
connecting. If the connection had been broken, the camera stop
transmitting video to user.
Bonjour
This function enables MAC systems to link to this IP camera.
Key in the name here.
The web browser "Safari" also has Bonjour function. Tick
"Include Bonjour" in the bookmark setting, and you can see the
IP camera appearing under the bonjour category. Click the icon
to connect the IP camera.