PLANET IGTP-80xT Series - Manual (Page 12)

12
2. Installation
This product provides three different running speeds – 10Mbps, 100Mbps
and 1000Mbps in the same Industrial 802.3at PoE Media Converter
and automatically distinguishes the speed of incoming connection, this
section describes the functionalities of IGTP-80xT’s components and
guides how to install it on the DIN Rail Basic knowledge of networking
is assumed. Please read this chapter completely before continuing.
2.1 Product Description
The Industrial 802.3at High Power over Ethernet Gigabit Media
converter – IGTP-80xT series, fully complies with IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z
1000Base-SX / LX, the Gigabit media conversion installation is quite
quick and easy by simple plugging and playing feature. The IGTP-
80xT series Industrial 802.3at High Power over Ethernet Gigabit Media
converter also supports flow control and back pressure in half-duplex to
eliminate packets loss.
The IGTP-80xT series extends communication distance with highly
Gigabit performance via fiber optical wire, in which the extension
distance could be up to 10km by applying IGTP-802TS and IGTP-805AT
(vary on SFP module) or up to 550m by IGTP-802T, the IGTP-80xT
series is specifically designed with durable components and strong
housing case to operate reliably in electrically harsh and climatically
demanding environments. The industrial level Gigabit media converter
provides a high level of immunity to electromagnetic interference and
heavy electrical surges which are usually found on plant floors or
traffic control cabinets in sidewalk. Being able to operate under the
temperature range from -40 to 75 Degree C allow the IGTP-80xT series
can be placed in almost any difficult environment.
The maximum distance between the PoE PSE to PD is 100 meters. To
extend the network device deployment range, the IGTP-80xT series is
integrated with Fiber interface. The IGTP-80xT series is used to convert
optical Ethernet signal to electrical Ethernet signal that allows two type
segments to connect easily, efficiently and inexpensively. It can convert
10/100/1000Base-T signal to 1000Base-SX / LX one and provides the
diverse options of fiber connecting types to meet different network
applications.