PLANET IGTP-80xT Series - Manual (Page 9)

9
Alarm
Provides one relay output for power fail
Alarm Relay current carry ability: 1A @ DC 24V
Speed
Twisted-pair: 10/20Mbps for Half / Full-Duplex,
100/200Mbps for Half / Full-Duplex
1000/2000Mbps for Full-Duplex
Fiber-optic: 200Mbps / 2000Mbps for Full-Duplex
Network Cables
10/100/1000Base-T:
2-Pair UTP Cat. 3, 4, 5, 5e, 6 (100 meters, max.)
EIA/TIA-568 100-ohm STP (100 meters, max.)
100Base-FX /1000Base-SX / LX:
Multi-mode: 50/125µm or 62.5/125µm optic fiber
Single-mode: 9/125µm optic fiber
Power Consumption
Without PoE:
24V: 4.3 Watts / 14BTU
48V: 4.8 Watts / 16BTU
With PoE:
24V: 33 Watts / 112BTU
48V: 31 Watts / 105BTU
Power over Ethernet
PoE Standard
IEEE 802.3af / 802.3at High Power over Ethernet
/ PSE
PoE Power Supply Type End-Span
PoE Power Output
52V DC. 15.4 Watts
52V DC. 30 Watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Budget 30 Watts
Standards Conformance
Standards Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX / FX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-SX / LX Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
Stability Testing
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)