PLANET IGTP-80xT Series - Manual (Page 16)

16
2.1.4 Converter Upper Panel
The upper panel of the Industrial 802.3at PoE Media Converter consist
one terminal block connector within two DC power inputs. Figure 2-3
shows the upper panel of the Industrial 802.3at PoE Media Converter.
DC 24V/48V
Figure 2-3: Industrial 802.3at PoE Media Converter upper Panel.
2.1.5 Wiring the Power Inputs
The 6-contact terminal block connector on the top panel of Industrial
802.3at PoE Media Converter is used for two DC redundant powers
input. Please follow the steps below to insert the power wire.
1. Insert positive / negative DC power wires into the contacts 1 and 2
for POWER 1, or 5 and 6 for POWER 2.
DC 24V/48V
V1- V1+ V2- V2+