PLANET IGTP-80xT Series - Manual (Page 13)

13
With the long Fiber distance support, it still sustains the transmission
performance as high as 1000Mbps. It works in high performance Store
and Forward mechanism, and also can prevent packet loss with IEEE
802.3x Flow Control (Full-Duplex) and the LFP (Link Fault Pass Through
function) (LLCF/LLR) with the DIP Switch design. Furthermore, it can
immediately alarm the administrators the issue from the link media and
provide efficient solution to monitor the network power usage.
To fill the growing demand of Industrial PoE PD devices those need
higher Power Input and long distance transmission, the IGTP-80xT
series Industrial 802.3at High Power over Ethernet Gigabit Media
converter with brand-new IEEE 802.3at High Power over Ethernet
technology applied. The IGTP-80xT provides the following key features:
IEEE 802.3at Power over Ethernet standard compliant u
IEEE 802.3af Power over Ethernet standard u
Maximum 30 Watts output power support u
10/100/1000Mbps duplex mode support on 1000Base-T port u
1000Mbps Fiber-Optical support on IGTP-802T / IGTP-802TS u
100Mbps / 1000Mbps Fiber-Optical support on IGTP-805AT u
The IGTP-80xT series is a Single-Port, End-Span Industrial IEEE 802.3at
High Power over Ethernet Gigabit Media converter with maximum
up to 30 Watts of power output over Ethernet cables. It is designed
specifically to satisfy the growing demand of higher power required
network equipments such as PTZ (Pan, Tilt & Zoom) network cameras,
PTZ Speed Dome, color touch-screen / Video and Voice over IP (VoIP)
telephones, multi- channel (11a / b / g / n) wireless LAN access points
and other Network devices that need higher power to function normally.
The IGTP-80xT series Industrial 802.3at High Power over Ethernet
Gigabit Media converter is an ideal solution to deliver data and power
to network devices directly via the RJ-45 Port interface without the
need of installing extra power outlets and electrical cabling.
2.1.1 Product Overview
The Front Panel of the Industrial 802.3at PoE Media Converter consists
of one 1000Base-SX / 1000Base-LX / mini-GBIC SFP ports and one
Auto-Sensing 10/100/1000Mbps Ethernet RJ-45 Port. Figure 2-1, 2-2
shows a front panel of Industrial 802.3at PoE Media Converter.