PLANET WAP-7500 - Manual (Page 52)

5.5 Password
From “Change Password” in “Management”, you can change or default the password to manage your
WAP-7500.
Figure 38 Password
Change Password
For security concern, you have to enter the current password first and then enter the new one
twice respectively in “New Password” and “Repeat New Password” fields.
Restore Default Password
If you would like to restore the default password, enter the current password first and then check
“Yes” and click “Apply” to default the password.
Note:
The password is case-sensitive and its length can not exceed 19 characters!
Page 52