PLANET WNAP-1110 - Manual (Page 21)


WPS Status - To enable or disable the WPS function here.
nsure the network security by generating a new PIN.
can add a new device to the existing network manually by clicking this
ess adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
between wireless adapter and access point using either Push Button Configuration
ration of the new device, here takes the WNL-U554A Wireless USB Adapter of our
ample.
dapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
ds.
Method One:
Step 1: Open the WNL-U554A Configuration Utility and click “WPS” tab.

Current PIN - The current value of the AP's PIN is displayed here.

Restore PIN - Restore the PIN of the AP to its default.

Gen New PIN - Click this button, and then you can get a new random value for the AP's PIN.
You can e

Add device - You
button.
To add a new device:
If the wirel
connection
(PBC) method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
For the configu
company for ex
I. By PBC
If the wireless a
method, you can add it to the network by PBC with the following two metho
Step 2: Set "Config Mode" to "Enrollee", and then push the "WPS" button on the front of AP.
15