PLANET WNAP-6305 User Manual
User’s manual
Advertising
Table of contents
Document Outline
- Chapter 1. Product Introduction
- Chapter 2. Hardware Description
- Chapter 3. Hardware installation
- Chapter 4. Software Installation
- Chapter 5. Basic System Settings
- Appendix A: FAQ
- 1. What and how to find my PC’s IP and MAC address?
- 2. What is Wireless LAN?
- 3. What are ISM bands?
- 4. How does wireless networking work?
- 5. What is BSSID?
- 6. What is ESSID?
- 7. What are potential factors that may causes interference?
- 8. What are the Open System and Shared Key authentications?
- 9. What is WEP?
- 10. What is Fragment Threshold?
- 11. What is RTS (Request to Send) Threshold?
- 12. What is Beacon Interval?
- 13. What is Preamble Type?
- 14. What is SSID Broadcast?
- 15. What is Wi-Fi Protected Access (WPA)?
- 16. What is WPA2?
- 17. What is 802.1x Authentication?
- 18. What is Temporal Key Integrity Protocol (TKIP)?
- 19. What is Advanced Encryption Standard (AES)?
- 20. What is Inter-Access Point Protocol (IAPP)?
- 21. What is Wireless Distribution System (WDS)?
- 22. What is Universal Plug and Play (UPnP)?
- 23. What is Maximum Transmission Unit (MTU) Size?
- 24. What is Clone MAC Address?
- 25. What is DDNS?
- 26. What is NTP Client?
- 27. What is VPN?
- 28. What is IPSEC?
- 29. What is WLAN Block Relay between Clients?
- 30. What is WMM?
- 31. What is WLAN ACK TIMEOUT?
- 32. What is Modulation Coding Scheme (MCS)?
- 33. What is Frame Aggregation?
- 34. What is Guard Intervals (GI)?
- Appendix B: Configuration Example
- Appendix C: Use Planet Smart Discovery to find AP
- Appendix D: Specifications
- Appendix E: Glossary
- EC Declaration of Conformity