2 hardware installation, 1 connect up – PLANET WNAP-6305 User Manual
Page 20
Advertising
User’s Manual of WNAP-6305
- 20 -
3.2 Hardware Installation
3.2.1 Connect Up
Step 1.
Push the latch at the bottom of the WNAP-6305 to remove the sliding cover.
Figure 3-1 Move the cover
Step 2.
Plug the RJ-45 Ethernet cable into the LAN Port of the WNAP-6305.
Figure 3-2 Cable Connection
RJ-45 8P8C Ethernet cable is required.
Advertising