PLANET WNAP-6305 User Manual
Page 60
Advertising
User’s Manual of WNAP-6305
- 60 -
Step 3.
Go to “Wireless Settings-> WDS” and fill in the MAC Address of the remote site.
Figure 5-28 WDS Configuration
1. To set up the WDS Connection, the channel must be the same in both sites. You
should fix the channel from “AutoSelect” to a static one.
2. You must fill in the MAC Address by each other. For example, enter the MAC
Address of the remote site to the settings of local site; and enter the MAC Address
of the local site to the settings of remote site.
3. The Encryption type must be the same in both sites if available.
Advertising