PLANET WNAP-6305 User Manual
Page 21
Advertising
User’s Manual of WNAP-6305
- 21 -
Step 3.
Slide the cover back and insert the protective plug to seal the bottom of the WNAP-6305.
Figure 3-3 Seal the bottom
Step 4.
Take out the power cord and PoE injector. Plug the power cord into the DC port and plug the
other side of the RJ-45 cable (as shown in Step 2) into the POE port of the PoE injector.
DC: Insert the DC plug of the AC adapter into this port.
POE: This port is linked to LAN port of the Outdoor Router with RJ-45.
LAN: This port is linked to LAN side -- PC/Hub or Router/ADSL modem device with RJ-45.
Figure 3-4 Connect to PoE Injector
Advertising