PLANET WNAP-6305 - Manual (Page 94)

User’s Manual of WNAP-6305
- 94 -
3. Example – set WLAN to be WAN as WiFi Client
User Mr. ABC likes to configure this WLAN Broadband Router to be a WiFi client. In order to
communicate with another AP, Mr. ABC collects information and plans the WLAN Broadband Router
implementation by the following configuration.

WiFi client:
WAN configuration: DHCP (Auto config)
IP Address n/a
Subnet Mask n/a
Default Gateway n/a
Primary DNS Address n/a
LAN configuration:
IP Address 10.10.10.254
Subnet Mask 255.255.255.0
DHCP Client Range 10.10.10.100 – 10.10.10.200
WLAN configuration:
SSID Depend on AP
Channel Number Depend on AP

WiFi server:
AP configuration:
SSID Test
Channel Number Channel 1
Wireless Encryption WPA2
DHCP server 192.168.1.33~192.168.1.254
1) Configure the Operation Mode:
Open “Operation Mode Configuration” page and select Wireless ISP. Then click “Apply” button to
confirm the configuration setting and reboot the WLAN Broadband Router. After reboot, the wireless
LAN will become WAN interface.