PLANET WNRT-625 - Manual (Page 14)

Chapter 3 Introduction to Web Configuration
3.1 Web Login
WNRT-625 with an assigned IP address allows you to monitor and configure via web browser (e.g., MS
Internet Explorer or Netscape).
1. Open your web browser.
2. Enter the IP address of your WNRT-625 in the address field (default IP address is
http://192.168.0.1).
3. Please enter your User Name and Password in the dialog box, and then click “OK”. Default User
name and password as below:
User Name: admin
Password: admin
4. Then you will see the WNRT-625 HOME screen as below.
3.2 Operation Mode
Choose Operation Mode and the following page appears. In this page, you can configure the
operation mode according to your practice.
¾
Bridge: All Ethernet and wireless interfaces are bridged into a single bridge interface.
¾ Gateway: The first Ethernet interface is treated as WAN interface. The other Ethernet interfaces
and the wireless interface are bridged together treated as LAN interfaces. If the device is in
Gateway operation mode, you can enable or disable NAT. Gateway is the default operation
mode.
14