PLANET WNRT-625 - Manual (Page 15)

¾ WISP: All the Ethernet ports are bridged together and the wireless interface of this router will
connect to ISP’s Access Point. The NAT is enabled and PCs in Ethernet ports share the same IP
to ISP through wireless LAN. The connection type can be setup in WAN page by using PPPoE,
DHCP client, PPTP/L2TP client or static IP.
If you select Bridge operation mode, WAN configuration in Internet Settings are not
available. (Firewall functions on the left page are not available.)
After finishing setting, click Apply to save the settings and make the new configuration take effect.
Click Cancel to close without saving.
3.3 Internet Settings
3.3.1 WAN
The WAN Settings screen allows you to specify the type of Internet connection. The WAN settings offer
the following selections for the router’s WAN port, STATIC (fixed IP), DHCP (Auto config), PPPoE
(ADSL), L2TP, and PPTP.
15