PLANET CAM-ISD52 User Manual
Page 56
.
.
User’s manual
55
Zoom TRK:
this is to drive focus-lens to move along and be
coordinated with zoom-lens, in order to keep
image clear during the entire zooming journey.
Zoom SPEED:
to set the speed of zooming.
Fast speed and slow speed have their own
goodness and weakness.
Fast speed saves time but may cause missing
of the best position for image size. Slow speed
does the opposite for the good and bad.
It is suggested you make test to different speed
before make the choice.
D-Zoom: to utilize digital zoom or not.
Digital zoom is to fill in the display with partial of
the image, therefore will not give the same detail
as the original image does. It could make help if
the target object does not have much detail.
For the 5 versions of PTZ this manual serves, they
have different ranges and operations.
Check the table on below for reference.
DISP Zoom MAG: to show or not show zoom number.
Default is OFF.
Zoom INIT POS: To assign zoom position for power-up condition.
Lens Init:
To re-calibrate the lens once. When you are
seeing abnormal focusing
(image is out-of-focus
even you engage auto-focus)
, zooming or exposure
(for example: complete white or black picture)
, you
may refresh the camera with this function.