Olympus PEN-F Pancake Zoom 14-42mm Kit - Manual (Page 75)

75 EN
Shooting
2
MF Press the button to select manual focus mode. Press the
button again to restore the previously selected AF mode.
RAWK Press the button to toggle between JPEG and RAW+JPEG
record modes.
K TEST (Test Picture) Pictures taken while the button is pressed are displayed in the
monitor but are not recorded to the memory card.
b (DigitalTele-converter) Press the button to turn digital zoom [On] or [Off].
D (Keystone
compensation)
Press the button once to display options for keystone
compensation and again to save changes and exit. To resume
normal photography, press and hold the selected button.
a (Magnify) The button performs the same function as the a (magnify)
button (P. 49).
Peaking Each press of the button switches the monitor between
display/non-display. When Peaking is displayed, histogram
and highlight/shadow display are not available.
When using Peaking, you can change colors and emphasis by
pressing the
INFO button.
AF Stop Stops autofocus.
j/ Y Choose a sequential shooting or self timer option.
# Choose a fl ash mode.
HDR Switches to HDR shooting with the saved settings.
BKT Turns on BKT shooting using stored settings.
Multi Function To recall the selected multi function during viewfi nder
photography, press the button to which [Multi Function] has
been assigned.*
g “Using multi function options (Multi
Function)” (P. 76)
G Lock (Touch panel
lock)
Press and hold the button to enable and disable touch panel
operation.
Electronic Zoom When using a lens with a power zoom function, after pressing
the button, use the arrow pad for zooming operations.To use
power zoom, you will fi rst have to assign [Direct Function] for
[n Function].
V Level Disp Press the button to display the level gauge and press it again
to turn off the level gauge. The level gauge is available when
[Style 1] or [Style 2] is set in [Built-in EVF Style].
S-OVF (Optical
viewfi nder simulation) Press the button for a viewfi nder display similar to an optical
viewfi nder.
will be displayed in the viewfi nder. Press again
to end [S-OVF].
u (Monitor switching) Press this button to switch between displaying/hiding the
preview. If the eye sensor is disabled, it switches between
monitor display and EVF display.
Lens Info Settings Display the lens info settings menu (P. 129).