Steinberg UR24C 2x4 USB Gen 3.1 Audio Interface - Manual (Page 15)

Software
UR24C Operation Manual 15
Hardware Setup Window
This window allows you to configure general hardware
settings and Cubase-linked function settings.
model
Displays the name of the device.
HPF
Selects the cutoff frequency of the high pass filter.
Settings: 120 Hz, 100 Hz, 80 Hz, 60 Hz, 40 Hz
Scene
Automatically applies scene information to the UR24C
device when loading a Cubase project file containing
UR24C scene data.
NOTICE
Data saved to the device will be overwritten.
Channel Link
Automatically configures stereo links based on the bus
configuration in use.