Steinberg UR24C 2x4 USB Gen 3.1 Audio Interface - Manual (Page 4)

Panel Controls and Terminals
UR24C Operation Manual 4
NOTE
When the phantom power switch is turned on and off, all inputs/
outputs will be muted for a few seconds.
[MIX] knob
Adjusts the volume balance of the output signal. The
function varies depending on the monitor mode settings.
Refer to the section “Monitor Mode” (
page 30 ).
Slide switch
Switches the sound to be monitored with headphones.
The function varies depending on the monitor mode
settings. Refer to the section “Monitor Mode” (
page 30 ).
[PHONES] jack
For connection to a set of stereo headphones.
[PHONES] knob
Adjusts the output signal level of the [PHONES] jack.
[OUTPUT] knob
Adjusts the output signal level of the [MAIN OUTPUT]
jack.
POWER indicator
Lights up when the power is turned on. When the monitor
mode is set to DAW, this lights in white; when the monitor
mode is set to DJ, this lights in red. The indicator flashes
continuously if the power supply is insufficient. In this
case, use the USB power adapter or USB mobile battery.