Sd (snare drum), Mix/route, Control knob – KORG Drumlogue Hybrid Drum Machine User Manual

Page 27: Sound select, Parameters

Advertising
background image

27

RESON(CUTOFF RESONANCE) [0.0%...100.0%]

Adjusts the cutoff resonance of the filter.

If you increase the value, the filter oscillates, which may cause the sound to

continue.

MIX/ROUTE

PAN

[L100%...L1%, C, R1%...R100%]

Adjusts the pan pot (left and right stereo localization).

DELAY [0.0%...100.0%]

Adjusts the feed amount of the delay effect.

REVERB [0.0%...100.0%]

Adjusts the feed amount of the reverb effect.

MASTER

[ON, BYPASS]

Sets the master effect to On or Bypass.

SIDECH (SIDECHAIN)

[0.0%...100.0%]

Adjusts the feed amount of the SIDECHAIN pass.

TIP

The master effect has an input that is referred to as the SIDECHAIN pass.

For example, in COMPRESSOR, you can use the SIDECHAIN pass to ob

-

tain a ducking effect.

SD (Snare drum)

Control knob

DECAY [0...1023]

Adjusts the sounding length of the drumhead. The greater the value, the longer the sound.

TUNE [0...1023]

Adjusts the pitch. The greater the value, the higher the sound.

SNAP.DEC (SNAPPY DECAY)

[0...1023]

Adjusts the snappy sound length of the snare drum.

SOUND SELECT

SNAPPY TYPE

[01..09]

Select the snappy tone of the snare drum.

PARAMETERS

TONE [0.0%...100.0%]

Adjusts the tuning deviation of the two drumheads.

Advertising