KORG Drumlogue Hybrid Drum Machine - Manual (Page 41)

41
PARAMETERS
TIME [0.0%...100.0%]
Adjusts the reverb time.
INPUT [0.0%...100.0%]
Adjusts the signal level of the reverb input.
BRIGHT [0.0%...100.0%]
Adjusts the tone (brightness) of the reverb.
RISE (Riser only) [0.0%...100.0%]
Adjusts the pitch-shifted reverb sound signal on the octave.
DIVE (Submarine only) [0.0%...100.0%]
Adjusts the pitch-shifted reverb sound signal below the octave.
MIX/ROUTE
LEVEL [0.0%...100.0%]
Adjusts the amount of the reverb effect.
RETURN [PRE, POST]
Select whether to put the reverb effect before or after the master effect.
MASTER (Master Effect)
SOUND SELECT
SELECT [---, Compressor, Filter, Boost, EQ Three, ...*]
Select the type of master effect.
Compressor : A basic compressor that raises the sound pressure.
Filter : A multi-mode filter with cutoff resonance.
Boost : A booster with adjustable center frequency and saturation.
EQ Three : A 3-band equalizer with adjustable crossover frequency.
* You can also add master effects created with the logue SDK ( → p.52 "Loading
user synth and effects").
PARAMETERS - For Compressor
THRESH (THRESHOLD) [-64.0dB...0.0dB]
Adjusts the threshold at which the compressor begins to apply.
ATTACK [0.5ms...100ms]
Adjusts the attack time that the compressor responds to.