KORG Drumlogue Hybrid Drum Machine User Manual
Page 7
7
12.
Display
This display shows information such as the current program, drum kit, and
pattern step as well as various parameter setting values.
13.
Parameter knobs 1 to 4
Select the item shown on the display or change the parameter value. If setting
items span over multiple pages, the indicator such as "1/2" (the first page of the
two pages) appears in the upper right corner of the display. Use these knobs in
combination with the PAGE UP/DOWN button.
14.
(PLAYBACK)/(STOP) button
Each time you press this button, this unit starts or stops playback. If you press
the button again after stopping, playback starts from the beginning of the pat
-
tern. Each time you press this button while holding down the SHIFT button,
playback starts from the pause or stop position.
15.
(REC) button
Used for real-time recording. Each time you press this button, recording
switches between start and stop. In addition to steps, you can record accent,
knob, and parameter motions (MOTION).
TIP
For step edit, press the STEP button.
16.
PROGRAM SELECT button
Press this button to select a program for this unit. If you press this button while
holding down the SHIFT button and select a program, you can switch to a new
program at the end of a bar or pattern (
17.
PROGRAM SAVE button
Press this button when saving the changed program to this unit. You can save
up to 128 programs in total; 16 programs each in eight banks, A to H.
18.
KIT SELECT button
Press this button to select a drum kit of this unit. If you press this button while
holding down the SHIFT button and select a drum kit, you can switch to a new
drum kit at the end of a bar or pattern (
19.
Kit save button
Press this button when saving the changed drum kit to this unit. You can save
up to 128 programs in total; 16 programs each in eight banks, A to H.
20.
LIVE button
Press this button to shift to Live mode. In Live mode, you can press buttons 1
to 13 (BD to USER) to check the sound. You can also set global parameters by
pressing this button while holding down the SHIFT button ("Global Param
21.
CHAIN button
Press this button when using Chain mode, which allows you to connect mul
-
tiple rhythm patterns to enhance performance ("Chain mode" p.20).