KORG Drumlogue Hybrid Drum Machine - Manual (Page 58)

58
MIDI Implementation Chart
Function...
Transmitted Recognized Remarks
Default
Changed
Mode
Default
Messages
Altered
Note
Number True voice
Velocity
Note On
Note Off
After
Touch
Key’s
Channel
Pitch Bend
Control
Change
Program
Change True Number
System Exclusive
System
Common
Song Position
Song Select
Tune Request
System
Real Time
Clock
Commands
Aux
Meassages
Local On/Off
All Notes Off
Active Sensing
System Reset
Notes
Mode 1: Omni On, Poly
Mode 3: Omni Off, Poly
Mode 2: Omni On, Mono
Mode 4: Omni Off, Mono
O: Yes
X: No
Consult your local Korg distributor for more information on MIDI implementation.
Basic
Channel
[HYBRID DRUM MACHINE]
Model: DRUMLOGUE
This is an alternate implementation selectable via MIDI Global settings.
For the default single channel implementation refer to the single channel implementation chart.
O (0–127)
*************
O (0–127)
0–127
*2
*3
*1
*4
*4
1–12
1–16 1–12
1–16
0–127
0–127
X 9n, V=64
X 8n, V=64 O 9n, V=1–127
X
0–127
*************
3
X
Date: 2023.1.12
Version: 1.02
X
X
*************
X
X O
O
X O
O O
X
X
X
X
X
O
X
O
X
X
O
O
O
O
X
O (123–127)
O
X
Memorized. Each part is assigned a separate channel.
Any continuous range of channels can be set.
Except for the MULTI part, pitch is unaffected by the note number.
PART 1-11: LEVEL MSB, LSB. PART 12: MASTER VOLUME MSB, LSB
PART 1-11: PAN
PART 1-11: REVERB SEND. PART 12: REVERB LEVEL
PART 1-11: DELAY SEND. PART 12: DELAY LEVEL
PART 1: BD TUNE, DRIVE, ATTACK, DECAY, SWEEP, SW.TIME, HOLD
PART 2: SD TUNE, SNAP.LV, SNAP.DEC, DECAY, TONE
PART 3: LT TUNE, DETUNE, DECAY, SWEEP, ATTACK, DRIVE
PART 4: HT TUNE, DETUNE, DECAY, SWEEP, ATTACK, DRIVE
PART 5: CH TUNE, DECAY, ATTACK, START, END
PART 6: OH TUNE, DECAY, ATTACK, START, END
PART 7: RS TUNE, DECAY, START, END
PART 8: CP TUNE, DECAY, ATTACK, START, END
PART 9: SP1 TUNE, ATTACK, DECAY, START, END
PART 10: SP2 TUNE, ATTACK, DECAY, START, END
PART 11: VPM NOISE, IDX MOD, NOTE, INDEX, RATIO, EG, ATTACK, RELEASE
PART 11: NOISE COLOR, ATTACK, RELEASE, PEAK
PART 11: USER SYNTH PARAM 1-8
PART 11: USER SYNTH PARAM 9-16
PART 12: DELAY PARAM 1-8
PART 12: DELAY PARAM 9-16
PART 12: DELAY RETURN, DELAY REVERB SEND
PART 12: MASTER FX PARAM 1-8
PART 12: MASTER FX PARAM 9-16
PART 12: REVERB RETURN
PART 12: REVERB PARAM 1-8
PART 12: REVERB PARAM 9-16
PART 1-12: ALL SOUND OFF, RESET ALL CONTROLLERS
7, 39
10
91
92
20, 21, 22, 23, 24, 25, 26
25, 26, 27, 28, 29
46, 47, 48, 49, 50, 51
50, 51, 52, 53, 54, 55
61, 62, 63, 80, 81
80, 81, 82, 83, 85
55, 56, 57, 58
58, 59, 60, 61, 62
102, 103, 104, 105, 106
106, 107, 108, 109, 110
108, 109, 110, 111, 112, 113, 114, 115
116, 117, 118, 119
16, 17, 18, 19, 20, 21, 22, 23
24, 25, 26, 27, 28, 29, 30, 31
12, 13, 14, 15, 16, 17, 18, 19
20, 21, 22, 23, 24, 25, 26, 27
44, 45
46, 47, 48, 49, 50, 51, 52, 53
54, 55, 56, 57, 58, 59, 60, 61
83
85, 86, 87, 89, 90, 102, 103, 104
105, 106, 107, 108, 109, 110, 111, 112
120, 121
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1 : When the GLOBAL setting MIDI RX CC is ON, the drumlogue will receive signals; and when the GLOBAL setting MIDI TX CC is ON,
the drumlogue will transmit signals. Signals are transmitted on the channel corresponding to the part.
*2 : When the GLOBAL setting MIDI RX PRG CHG is ON, the drumlogue will receive signals; and when the GLOBAL setting MIDI TX PRG CHG is ON,
the drumlogue will transmit signals.
*3 : In addition to Korg exclusive messages, Inquiry is supported.
*4 : When the GLOBAL setting CLOCK SOURCE is INT, the drumlogue will not receive signals. The drumlogue will receive signals when set to AUTO.
MULTI Ch.
Received only by USER SYNTH on MULTI part, according to channel.
Received only by USER SYNTH on MULTI part, according to channel.
Received by each part according to channel.