HP Color LaserJet Pro MFP M182nw User Manual
Page 110
2-line control panels:
a.
On the printer control panel, press the Setup button .
b.
Open the following menus:
a.
System Setup
b.
Paper setup
c.
Select the tray from the list.
d.
Select
Default Paper Type
and then select the type of paper that is in the tray.
e.
Select
Default Paper Size
and then select the size of paper that is in the tray.
3.
Turn the printer off, wait 30 seconds, and then turn it on again.
4.
Print a cleaning page to remove excess toner from inside the printer.
LED control panels:
a.
Open the HP Printer Assistant.
●
Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the printer name.
b.
In the HP Printer Assistant, select Print, and then select HP Device Toolbox.
c.
On the Systems tab, click Service.
d.
In the Cleaning Mode area, click Start to begin the cleaning process.
2-line control panels:
a.
On the printer control panel, press the Setup button .
b.
Open the
Service
menu.
c.
Select
Cleaning Page
.
d.
Load plain letter or A4 paper when you are prompted.
Wait until the process is complete. Discard the page that prints.
5.
Print a configuration page to test the printer.
LED control panels:
▲
Press and hold the Start Color Copy / Resume button
until the Ready light begins blinking,
and then release the button.
100 Chapter 9 Solve problems
ENWW