HP Color LaserJet Pro MFP M182nw - Manual (Page 122)

Check toner-cartridge status
Follow these steps to check the estimated life remaining in the toner cartridges and if applicable, the status of
other replaceable maintenance parts.
NOTE: The steps vary according to the type of control panel.
1 2
Table 9-12 Control panels
Number Description
1 LED control panel
2 2-line control panel
Step one: Print the supplies status page (LED control panels)
The printer prints the supplies summary page when it prints the configuration page.
1. Press and hold the Resume button until the Ready light begins blinking.
2. Release the Resume button .
Step one: Print the supplies status page (2-line control panels)
1. On the printer control panel, press the Setup button .
2. Select Reports .
3. Select Supplies Status .
Step two: Check supplies status
1. Look at the supplies status report to check the percent of life remaining for the toner cartridges and if
applicable, the status of other replaceable maintenance parts.
Print quality problems can occur when using a toner cartridge that is at its estimated end of life. The
supplies status page indicates when a supply level is very low.
HP’s Premium Protection Warranty expires when a message indicating that HP’s Premium Protection
Warranty on this supply has ended appears on the Supplies Status Page or the EWS.
The toner cartridge does not need to be replaced now unless the print quality is no longer acceptable.
Consider having a replacement available to install when print quality is no longer acceptable.
112 Chapter 9 Solve problems ENWW