HP Color LaserJet Pro MFP M182nw - Manual (Page 80)

Configure IP network settings
● Introduction
● Printer sharing disclaimer
● View or change network settings
● Rename the printer on a network
● Manually configure IPv4 TCP/IP parameters from the control panel
Introduction
Use the following sections to configure the printer network settings.
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and
not of the HP print drivers. Go to Microsoft at www.microsoft.com .
View or change network settings
Use the HP Embedded Web Server to view or change IP configuration settings.
NOTE: The steps vary according to the type of control panel.
1 2
Table 8-2 Control panels
Number Description
1 LED control panel
2 2-line control panel
1. Open the HP Embedded Web Server (EWS):
LED control panels
a. Open the HP Printer Assistant.
● Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.
● Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
70 Chapter 8 Manage the printer ENWW