HP Color LaserJet Pro MFP M182nw - Manual (Page 78)

Table 8-1 EWS tabs or sections
Tab or section Description
Home tab
Provides printer, status, and
configuration information.
● Device Status: Shows the printer status and shows the approximate percent life remaining
of HP supplies.
● Supplies Status: Shows the approximate percent life remaining of HP supplies. Actual supply
life remaining can vary. Consider having a replacement supply available to install when print
quality is no longer acceptable. The supply does not need to be replaced unless the print
quality is no longer acceptable.
● Device Configuration: Shows the information found on the printer configuration page.
● Network Summary: Shows the information found on the printer network configuration
page.
● Reports: Print the configuration and supplies status pages that the printer generates.
● Color Usage Log: Shows a summary of color jobs that the printer has produced.
● Event Log: Shows a list of all printer events and errors.
● Open Source Licenses: Shows a summary of the licenses for open source software
programs that can be used with the printer.
System tab
Provides the ability to configure the
printer from your computer.
● Device Information: Provides basic printer and company information.
● Paper Setup: Change the default paper-handling settings for the printer.
● Print Quality: Change the default print-quality settings for the printer.
● Energy Settings: Change the default times for entering Sleep/Auto Off mode or automatic
shut down.
● Print Density: Change the print density of contrasts, highlights, midtones, and shadows.
● Paper Types: Configure print modes that correspond to the paper types that the printer
accepts.
● System Setup: Change the system defaults for the printer.
● Supply Settings: Change the settings for Cartridge is low alerts and other supplies
information.
● Service: Perform the cleaning procedure on the printer.
● Save and Restore: Save the current settings for the printer to a file on the computer. Use
this file to load the same settings onto another printer or to restore these settings to this
printer at a later time.
● Administration: Set or change the printer password. Enable or disable printer features.
NOTE: The System tab can be password-protected. If this printer is on a network, always
consult with the administrator before changing settings on this tab.
Print tab
Provides the ability to change default
print settings from your computer.
● Printing: Change the default printer print settings, such as number of copies and paper
orientation. These are the same options that are available on the control panel.
● PCL5: View and change the PCL5 settings.
● PostScript: Turn off or on the Print PS Errors feature.
68 Chapter 8 Manage the printer ENWW