Adjust print density – HP Color LaserJet Pro MFP M182nw User Manual
Page 128
1.
From the software program, select the Print option.
2.
Select the printer, and then click the Properties or Preferences button.
3.
Click the Paper/Quality tab, and locate the Print Quality area.
4.
If the entire page is too dark, use these settings:
●
Select the 600 dpi option, if available.
●
Select the EconoMode check box to enable it.
If the entire page is too light, use these settings:
●
Select the FastRes 1200 option, if available.
●
Clear the EconoMode check box to disable it.
5.
Click the OK button to close the Document Properties dialog box. In the Print dialog, click the OK button to
print the job.
Adjust Print Density
Complete the following steps to adjust the print density.
NOTE:
The steps vary according to the type of control panel.
1
2
Table 9-16
Control panels
Number
Description
1
LED control panel
2
2-line control panel
1.
Open the HP Embedded Web Server (EWS):
LED control panels
a.
Open the HP Printer Assistant.
●
Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
118 Chapter 9 Solve problems
ENWW