Shared voice/fax line with an answering machine – HP Color LaserJet Pro MFP M182nw User Manual
Page 67
c.
Select the
Fax Setup
menu.
d.
Select the
Basic Setup
menu.
e.
Select the
Answer Mode
setting, and then select the
Automatic
option.
5.
Set the printer to check for a dial tone before sending a fax.
NOTE:
This prevents the printer from sending a fax while someone is on the telephone.
a.
From the control panel, open the
Setup
menu.
b.
Select the
Fax Setup
menu.
c.
Select the
Advanced Setup
menu.
d.
Select the
Detect Dial Tone
setting, and then select
On
.
6.
Continue to
Step 3: Configure the fax time, date, and header on page 59
.
Shared voice/fax line with an answering machine
Follow these steps to set up the printer on a shared voice/fax line with an answering machine.
1.
Disconnect any devices that are connected to the telephone jack.
2.
Connect the telephone cable to the fax port on the printer and to the telephone jack on the wall.
NOTE:
Some countries/regions might require an adapter for the telephone cable that came with the
printer.
NOTE:
On some printers, the fax port might be above the phone port. Refer to the icons on the printer.
3.
Remove the plug from the telephone line out port on the rear of the printer.
ENWW
Set up to send and receive faxes
57